MEEN 260 MEEN260 Lab 1- Introduction to LabVIEW Programming – Texas A&M

Description

MEEN 260 MEEN260 Lab 1- Introduction to LabVIEW Programming – Texas A&M

MEEN 260 Lab Manual- Spring 2020

LAB 1-INTRODUCTION TO LABVIEW PROGRAMMING

REQUIRED PERSONAL PROTECTIVE EQUIPMENT:

Proper Lab Attire (see Safety and Orientation Section)

LIST OF EQUIPMENT:

•Computer with LabVIEW

•VirtualBench

INTRODUCTION

This course is designed to equip you to effectively plan and conduct experiments using modern sensing,signal conditioning, and data acquisition techniques.

The ability to plan and conduct experiments is avaluable asset to an engineer because testing and experimentation plays an important role in validation ofdesigns, verification of analytical results and system modeling.

The lab exercises in this course primarilyinvolve the use of computer-based data acquisition to monitor the behavior of mechanical, thermal, andfluidic systems.

This first lab exercise is designed to introduce you to the concept of computer-based data acquisition and to LabVIEW, a software package developed by National Instruments that will be used extensively in this course.

OBJECTIVES:

•To create Virtual Instruments in LabVIEW.

•To acquire data using Data Acquisition Systems.

•To create programs in LabVIEW to acquire and generate data.

COMPUTER–BASED DATA ACQUISITION:

Often when studying mechanical systems, it is useful to use electronic sensors to monitor certain importantsystem variables.

Although the output from these sensors can be viewed using other types of instrumentssuch as oscilloscopes (Figure 1-1) or voltmeters, it is sometimes preferable to use a computer to viewand record data through the use of an Analog-to-Digital conversion card.

One particular advantage of using computers in this way is that data can easily be stored and converted to a format that can be used byspreadsheets (such as Microsoft Excel) or other software packages for analysis.

One important step in the data acquisition process is the conversion of analog signals received from sensing instruments to digital representations that can be processed by the computer.

Since data must be stored inthe computer’smemory in the form of individual data points represented by binary numbers, incominganalog data must be sampled at discrete time intervals and quantized (rounded off) to one of a set of pre-defined values.

In most cases, this is accomplished using a Digital-Analog (D/A) conversion card.

NATIONAL INSTRUMENTS LABVIEW:

LabVIEW is a software package that provides control and user interface for the data acquisition process.Figure 1-2 is a schematic showing the data flow in the data acquisition process.

LabVIEW plays a pivotal role in the data acquisition process. Through the use of Virtual Instruments (VIs), LabVIEW directs the real-time sampling of sensor data through the Input-output (I/O) card or a USB Data Acquisitioning System (DAQ) board. LabVIEW is capable of storing, processing and

MEEN 260 MEEN260 Lab 1- Introduction to LabVIEW Programming – Texas A&M

MEEN 260 INTRODUCTION TO ENGINEERING EXPERIMENTATION School: Texas A&M University (Texas A&M) *Professor:LANGARI, Staff, Rasmussen, Tafreshi, Joh… Documents (398) Q&A (28) Textbook Exercises

Most important docs of the week 7 pageslab 6 report.docxlab 6 report.docx Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Fall 2019 Register Now lab 6 report.docx 4 pagesHW7HW7 Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2012 Register Now HW7 134 pages_MEEN 260 Lab Manual Spring2017_revised_v2.0.pdf_MEEN 260 Lab Manual Spring2017_revised_v2.0.pdf Texas A&M University Measurements

MEEN 260 – Spring 2018 Register Now _MEEN 260 Lab Manual Spring2017_revised_v2.0.pdf 9 pageslab8lab8 Texas A&M University Mechanical Measurements

MEEN 260 – Fall 2010 Register Now lab8 8 pagesLab 07 Filter Circuits Worksheet.docxLab 07 Filter Circuits Worksheet.docx Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 MEEN260 Lab 1- Introduction to LabVIEW Programming – Texas A&M

MEEN 260 – Spring 2013 Register Now Lab 07 Filter Circuits Worksheet.docx INTRODUCTION TO ENGINEERING EXPERIMENTAT… Documents All (398) Homework Help (49) Lab Reports (29) Notes (97) Test Prep (14) Showing 1 to 30 of 398 Sort by:

Most Popular 2 pagesHW6HW6 Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2012 Register Now HW6 2 pagesHomework 9Homework 9 Texas A&M University Measurements

MEEN 260 – Fall 2008 Register Now Homework 9 1 pagesQUIZ1QUIZ1 Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2012 Register Now QUIZ1 6 pagesDaniel Aselin MEEN 260 Lab 02 Memo Final Draft.pdfDaniel Aselin MEEN 260 Lab 02 Memo Final Draft.pdf Texas A&M University MECHANICAL MEASUREMENTS

MEEN 260 – Summer 2014 Register Now Daniel Aselin MEEN 260 Lab 02 Memo Final Draft.pdf 3 pagesRV ApplicationRV Application Texas A&M University

MEEN 260 – Fall 2015 Register Now RV Application 1 pagesQUIZ7QUIZ7 Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2012 Register Now QUIZ7 7 pagesHomework 4 SolutionHomework 4 Solution Texas A&M University Measurements

MEEN 260 MEEN260 Lab 1- Introduction to LabVIEW Programming – Texas A&M

MEEN 260 – Fall 2008 Register Now Homework 4 Solution 24 pagesLab 02 Electromechanical 02_2019.pdfLab 02 Electromechanical 02_2019.pdf Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2019 Register Now Lab 02 Electromechanical 02_2019.pdf 1 pagesQUIZ3QUIZ3 Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2012 Register Now QUIZ3 9 pagesLab 3 MEMO.pdfLab 3 MEMO.pdf Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2013 Register Now Lab 3 MEMO.pdf 2 pagesHW5HW5 Texas A&M University Mechanical Measurements

MEEN 260 – Fall 2010 Register Now HW5 4 pagesHW4_2014_SolutionHW4_2014_Solution Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Fall 2014 Register Now HW4_2014_Solution 2 pagesHW9HW9 Texas A&M University Mechanical Measurements

MEEN 260 – Fall 2010 Register Now HW9 2 pagesHW9HW9 Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2012 Register Now HW9 2 pagesHomework 4Homework 4 Texas A&M University Measurements

MEEN 260 MEEN260 Lab 1- Introduction to LabVIEW Programming – Texas A&M

MEEN 260 – Fall 2008 Register Now Homework 4 1 pagesExam1NotesExam1Notes Texas A&M University Mechanical Measurements

MEEN 260 – Fall 2010 Register Now Exam1Notes 5 pagesLab 04 LVDT Accelerometer Worksheet 03_2019.pdfLab 04 LVDT Accelerometer Worksheet 03_2019.pdf Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2019 Register Now Lab 04 LVDT Accelerometer Worksheet 03_2019.pdf 4 pagesMEEN 260 Pre-lab 1.docxMEEN 260 Pre-lab 1.docx Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2013 Register Now MEEN 260 Pre-lab 1.docx 25 pagesLab 02 Electromechanical .docxLab 02 Electromechanical .docx Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2013 Register Now Lab 02 Electromechanical .docx 9 pagesHomework 10 SolutionHomework 10 Solution Texas A&M University Measurements

MEEN 260 – Fall 2008 Register Now Homework 10 Solution 1 pagesHW1HW1 Texas A&M University Mechanical Measurements

MEEN 260 – Fall 2010 Register Now HW1 12 pagesLab 05 Thermocouple Lab Worksheet.docxLab 05 Thermocouple Lab Worksheet.docx Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 MEEN260 Lab 1- Introduction to LabVIEW Programming – Texas A&M

MEEN 260 – Spring 2013 Register Now Lab 05 Thermocouple Lab Worksheet.docx 8 pagesMEMO 8.docxMEMO 8.docx Texas A&M University

MEEN 260 – Fall 2015 Register Now MEMO 8.docx 6 pagesLab 01 Mechanical Tolerance-Lab Instructions.pdfLab 01 Mechanical Tolerance-Lab Instructions.pdf Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2019 Register Now Lab 01 Mechanical Tolerance-Lab Instructions.pdf 8 pagesHW11_2014_SolutionHW11_2014_Solution Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2019 Register Now HW11_2014_Solution 7 pagesHomework 9 SolutionHomework 9 Solution Texas A&M University Measurements

MEEN 260 – Fall 2008 Register Now Homework 9 Solution 1 pagesQUIZ5QUIZ5 Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2012 Register Now QUIZ5 6 pagesHomework 6 SolutionHomework 6 Solution Texas A&M University Measurements

MEEN 260 MEEN260 Lab 1- Introduction to LabVIEW Programming – Texas A&M

MEEN 260 – Fall 2008 Register Now Homework 6 Solution 6 pageslab3lab3 Texas A&M University Mechanical Measurements

MEEN 260 – Fall 2010 Register Now lab3 2 pagesHomework 6Homework 6 Texas A&M University Measurements

MEEN 260 – Fall 2008 Register Now Homework 6 Prev 1 2 3 4 5 Next Recent Documents 4 pagesHW 08_Signal Anaysis_2021F Problems.docxHW 08_Signal Anaysis_2021F Problems.docx Texas A&M University MECHANICAL MEASUREMENTS

MEEN 260 – Summer 2014 Register Now HW 08_Signal Anaysis_2021F Problems.docx 4 pagesLab 03 Prelab 2021F.docxLab 03 Prelab 2021F.docx Texas A&M University MECHANICAL MEASUREMENTS

MEEN 260 – Summer 2014 Register Now Lab 03 Prelab 2021F.docx 7 pagesLab 05 Worksheet Fall 2021-1.docxLab 05 Worksheet Fall 2021-1.docx Texas A&M University INTRODUCTION TO ENGINEERING EXPERIMENTATION

MEEN 260 – Spring 2013 Register Now Lab 05 Worksheet Fall 2021-1.docx 6 pagesHW 07_DAQ_2021F_Solution – Tagged.pdfHW 07_DAQ_2021F_Solution – Tagged.pdf Texas A&M University MECHANICAL MEASUREMENTS

MEEN 260 MEEN260 Lab 1- Introduction to LabVIEW Programming – Texas A&M

MEEN 260 – Summer 2014 Register Now HW 07_DAQ_2021F_Solution – Tagged.pdf 7 pagesHW 06_2021F solutions and rubric – Tagged.pdfHW 06_2021F solutions and rubric – Tagged.pdf Texas A&M University MECHANICAL MEASUREMENTS

MEEN 260 – Summer 2014 Register Now HW 06_2021F solutions and rubric – Tagged.pdf INTRODUCTION TO ENGINEERING EXPERIMENTAT… Tests Questions & Answers Showing 1 to 8 of 28 View all Please see an attachment for details 1 2 3 4 5

Please see an attachment for details 1 2 3 4 5 Please see an attachment for details 1 2 3 4 5 Please see an attachment for details 1 2 3 4 5 Please see an attachment for details 1 2 3 4 5 Please see an attachment for details 1 2 3 4 5 Please see an attachment for details 1 2 3 4 5

Please see an attachment for details 1 2 3 4 5 Back to Department Related Courses MEEN 221 – STATICS & PARTICLE DYNAMICS (905 Documents)MEEN 315 – MECHANICAL MEAS (543 Documents)MEEN 364 – Dynamic Systems and Controls (404 Documents)

MEEN 222 – MATERIALS SCIENCE (391 Documents)MEEN 344 – FLUID MECHANICS (313 Documents)MEEN 363 – Dynamics and Vibrations (306 Documents)

MEEN 360 – Materials and manufacturing processes (278 Documents)MEEN 225 – Engineering Mechanics (271 Documents)MEEN 368 – Solid Mechanics (219 Documents)MEEN 461 – Heat Transfer (213 Documents)